Studer Vista 5 M3 Page 137 Operating Instructions Manual Download

Page: 137 / 564

Vista 5 M3 Digital Mixing System

Parameters 3-49

Document generated: 28.08.13

SW V4.9

3.4.4

VistaMix (VMX)

Basics

Studer VistaMix is an automatic mix algorithm based on gain sharing, intro-

duced with SW V4.9. VistaMix processing comes in very handy in multi-

microphone situations, such as round-table discussions or unscripted games

shows, in which indirect voice and early reflection-spill negatively affects

the summed mix. It reacts faster and much more precisely than any human

operator could possibly be, thus avoiding late fade-ins.

Working Principle

The concept of VistaMix is to analyse the input channels assigned to the

VistaMix group, and only open the gain of those channels that have active

speakers talking. By reducing the gain of non-active talkers, spill, studio

noise and ambience is greatly reduced. VistaMix calculates the gain of the

contributing channels in such a way that the cumulative gain of all member

channels always equals the gain value of one open microphone. This avoids

modulation of the ambience and background noise.

Please note that this

system does not use gates or expanders.

The four situations in the example image below, with 3 speakers each, show

the reaction of VistaMix (Gain) according to the actual individual input levels

(dB SPL).

The VMX Bus

VistaMix functionality is integrated into a new ‘VMX’ mix bus type, to which

any mono channel can be routed. The VMX bus colour representation on the

Vistonics screens is cyan.

Please note that stereo and surround channels may

not be routed to VistaMix busses

There are two Bus types – mono and stereo output. Each type may be con-

figured with 8, 12, 16 or 20 maximum contributing mono channels. Unlike

conventional bus types, the VMX bus types can only be configured by adding

a VMX channel. The configuration tool will then automatically construct the

channel/processing/bus structure.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands