Studer Vista 5 M3 Page 511 Operating Instructions Manual Download

Page: 511 / 564

Vista 5 M3 Digital Mixing System

DAW Control 7-7

Document generated: 28.08.13

SW V4.9

System MIDI Port

Make sure that the Windows operating system does not assign one of the

above MIDI sessions to the Windows default output device. A channel shift

might be the result of this faulty assignment.

Open the Windows Control Panels after the above installation steps, open the

Sounds and Audio Devices Panel and select the “Audio” tab.

In the example below, the MIDI playback default device is showing Vista (3),

which is one of the rtp sessions. This is a faulty configuration.

Choose another device if available, depending on the operating system and

hardware, there can be a free onboard device. If there is no available alterna

tive device, there are 2 alternatives :

1. choose a 5th session in the rtpMIDI setup and give it a different name, e.g.

“SystemDefault”

and choose it as default device

2. install a dummy output device, like MIDI Yoke and assign it as default

device.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands