Studer Vista 5 M3 Page 411 Operating Instructions Manual Download

Page: 411 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-115

Document generated: 28.08.13

SW V4.9

Notes

User Labels can be displayed on ‘Group’ buttons by selecting ‘User Labels

on Group Buttons’ from the Options menu.

The buttons in the Channel Selector Window select channels and groups on

a global basis. If individual (or subsets of) channels/groups are to be selected

for editing, the ‘Show Channels>>’ facility must be used.

5.17.2.3

Object Selector Window

This window contains buttons that correspond with the elements (or objects)

that are contained within the channels.

Note

It is important to realize that the Object Selector Window will display

all

elements that are included in the VMC. While an object might appear in the

window, it might not be configured within the selected channel(s). Objects

not included anywhere in the VMC will not appear in the Object Selector

Window.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands