manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 288 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 288

Vista 5 M3 Digital Mixing System

4-144  GC Operation

Document generated: 28.08.13

SW V4.9

toggled when the Master Mute is used. If Toggle is not selected, all Mutes 

on the members will be forced to the same status as the Master Mute the next 

time the Master Mute is used, regardless of their original status.

 

Member Behavior

  When a new member is added to a Control Group, it keeps its values until 

a change is made in the Control Group Master. At that moment, the change 

is transferred to all members. When a member is separated from a Control 

Group it keeps its current setting which includes the Master offset(s) that 

have been applied along the way. Member values can be changed locally at 

any time, without affecting the status of the other members or of the Control 

Group Master. 

 

 

Over-Range

  All controls can have an over-range. The over-range condition can occur if 

the Member Fader has reached its top or bottom position while the Master 

Fader is still moving. During over-range, the relative levels of the members 

are kept intact, even if the Fader (and the audio level) can not move anymore.

 

  Over-range can be positive or negative. The maximum value of over-range 

can be twice the normal working range of the Fader (100 dB) in both up and 

down directions. 

 

  The over-range of a Member can be zeroed easily. Simply move the Fader of 

a Member in over-range by a bit, and the over-range will be zeroed. 

 

Note: 

  This will, however, clear the initial relative level of that particular Member 

with respect to the other Members.

 

Snapshots

  Control Groups are part of the snapshot. Their data comprise three parts:

 

  •  Members of a Control Group (which channels are Members in a Control 

Group);

 

  •  Control Group settings (filter and Copy settings);

 

  •  Parameter values of the Control Group Masters.

4.7.6.2 

Control Group Assignment

 

  A Control Group Assignment dialog window can be started from the SysAd-

min (system administration) menu in the graphical controller. This window 

allows to view the members for a selected Control Group and to edit the 

members by clicking or dragging them graphically on the screen. Selection 

of the control group to be edited is not synchronized with the Desk selection 

– so two different control groups can be viewed at a time.

  

The Control Group Assignment window serves a similar function as the 

SETUP: GROUPS

 key on the control surface, except assignments are made 

via software, and the Control Group Filter window does not open. 

 

  To assign a channel to a Control Group, select a Control Group Master using 

the pop-up menu in the field at the top of the window. Channels can be assig-

ned or de-assigned by double-clicking the channel’s name. Keep in mind 

that a channel can belong to only one Control Group at a time. If assigned, 

a yellow N will appear in the box to the left of the channel name, and the 

number of the Control Group will be displayed in the channel’s fader. Control 

Group Assignments are saved within snapshots and presets.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments