Studer Vista 5 M3, Operating Instructions Manual

Page: 434 / 564

Vista 5 M3 Digital Mixing System
5-138 AutoTouchPlus
Document generated: 28.08.13 SW V4.9
All Clr – Permits changing of all preselectors at once.
• If one ore more preselectors are active, All Clr clears all of them
• If none of the preselectors are active, All Clr activates all of them.
• If All Clr and a global enable mode (e.g. Write Enable ) is clicked, this
brings all controls into Write Enable (as if preselectors were bypassed).
TOUCH – HELD (see also chapters 5.8.1 through 5.8.4 )
Record – If activated, touching a write or trim enabled control element
(e.g. fader) will put it into record.
Hold – If activated, touching and releasing a control element (e.g. fader) will
simulate a touch and hold the object even if the control has been released.
HELD – Plays Mix – When this button is engaged (see also chapter 5.8.5.1 ),
all held controls play back their Read Mix data if not in Record , but the
controls can be set to different physical positions.
The Read Mix data is heard, even though one or more controls are being held.
This allows a held control to be pre-positioned while awaiting a punch-in. The
result is true emulation of the resulting mix while the Mix Pass is running.
Clr – Clicking this button will take all held controls out of hold. It will also
clear the list of controls in the held controls buffer.
GLOBAL RECORD (see also chapter 5.9 )
Punch In – Write or Trim Enabled controls are put into record (depending
on the GLOBAL RECORD preselector setting).
Punch Out – Control elements currently in Record are punched out (de-
pending on the GLOBAL RECORD preselector setting).