Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-63
Document generated: 28.08.13
SW V4.9
5.9 Global Record
Controls can be ‘punched in and out’ on a global basis. Global punch-ins and
punch-outs are accomplished in one of three ways:
1.
Manually: Using the
Punch In
and
Punch Out
activator buttons in the
GLOBAL RECORD
section of the ACU window
2.
Automatically: Enabling the Write Zone and
Punch In/Out
in the ‘Auto-
Touch Plus’ window of the Graphical Controller (GC). Refer to
chapter
5.9.4,
Auto Punch-In/Out.
3.
Automatically via a GPI input (refer to
chapter 5.9.5
).
Conditions
If no controls of the type chosen of the
GLOBAL RECORD
preselector are
enabled, Global
Punch In
has no effect. Likewise, if no controls of the type
chosen of the
GLOBAL RECORD
preselector are in record mode, Global
Punch Out
has no effect.
Note
Individual controls can be punched in and out independently of the
GLOBAL
RECORD
functions. This is done locally on the channel strip.
5.9.1
Preselectors
Preselectors
Regardless of the punch method used, the
GLOBAL RECORD
preselectors
determine which controls are affected when a global
PUNCH-IN
occurs.
Multiple preselectors may be active at a time. Any and all combinations are
allowed. Preselectors will illuminate when active.
The following describes the control classifications as defined by the
GLOB-
AL RECORD
preselectors:
•
Fdr
(Fader): The fader of all channel types
•
Mute
(Mute): The Mute of all channel types
•
Knob
(Encoders): All continuous rotary type encoders. This does
not
include knobs that control ‘selectors’, such as pan format or phase inver-
sion.
•
Sw
(Switches): All switches (keys) and selectors (keys and knobs)
•
Held
(Held Controls): All controls that are currently in a ‘Held’ status.
(This could be any combination of faders, mutes, switches, and encoders).
Refer to
chapter 5.8.3
.
Summary of Contents for Vista 5 M3
