Studer Vista 5 M3 Operating Instructions Manual Download

Page: 380 / 564

Vista 5 M3 Digital Mixing System

5-84 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.12 Graphical Controller Automation

As discussed in the Switch Automation chapter, controls that are defined in

the VMC may be automated. While most of these controls are desk oriented,

some controls are found only in the Graphical Controller.

Automated Items

Automatable items in the Graphical Controller are as follows:

• General Patch Connections

• Channel Patch:

- Input Selector

- Processor Block Order

- Dynamic Sidechain Link Setup

- Dynamic Sidechain Link Enable

- Dynamic Key Input Routing

- Direct Output Tap Location

- Meter Feed Tap Location

5.12.1 General Patch

Connections within the General Patch may be automated. Both ‘Make Con-

nection’ and ‘Break Connection’ operations may be stored as Static objects

or recorded as Dynamic objects. All types of General Patch connections may

be recorded.

Connection Behavior

The General Patch does not have dedicated automation controls. The current

global automation modes apply to the General Patch. The

preselector

must be used to select global modes.

General Patch connections follow the rules of a Press and Release switch

operation. Refer to

chapter 5.11.3.1

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands