manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 431 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 431

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-135

Document generated: 28.08.13

SW V4.9

5. 

Enter the name of the new User File in the Save User File As field and 

click OK. 

6. 

A new User File will be created.

 

Load a User File 

Use the following procedure to store a User File:

1. 

Select ‘Load Mix Options…’ from the GC Automation menu. 

The Load User File As window will open.

  

2. 

The User folder containing the active User File will be open and the ac-

tive User File will be indicated in blue letters.

3. 

If necessary open the appropriate User folder by clicking the + icon for 

that User or double-click the name. The folder will open and display its 

contents. 

4. 

Double-click the name of the desired User File or single-click the name 

to highlight it and then click the ‘Load’ button. 

5. 

The selected User File will be loaded.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments