Studer Vista 5 M3 Page 124 Operating Instructions Manual Download

Page: 124 / 564

Vista 5 M3 Digital Mixing System

3-36 Parameters

Document generated: 28.08.13

SW V4.9

LR PAN for Stereo

Channels

The PAN ON/OFF and PAN functions are extended to enable working with

either standard (L/R) stereo or with MS (mono/side) signals. In addition,

features are available to increase the stereo image manipulation possibilities,

such as

• Input direction or

• Input balance,

• Stereo width (pan width), and

• Stereo direction.

The s

tereo width function has to be activated with the Session Configuration

Tool, if required.

Left

Right

Listening Position

Direction

Stereo

Width

+30°

–30°

Virtual Surround Panning (VSP)

Various surround panning algorithms can be configured for mono input,

group, multi-track input, and multi-track monitor channels using the Session

Configuration Tool.

Basically, two different surround panning algorithms are available: Multi-

format pan, and VSP (Virtual Surround Panning), see table; some more

information on these algorithms is given in the ‘Parameters’ sections below.

Algorithm:

Format

2-CH to

7.1-CH

LCR, F/B,

Ls/Rs Pan Divergence

Seamless Center

Channel Usage

Pan Mode

VSP Controls:

Ambience, Distance,

Absorption, Room Size

Multi-Format

Pan

Amplitude

–

VSP Pan

Amplitude, HRTF,

Sphere, ORTF, AB

Depending upon the currently loaded session configuration, one or both

algorithms above may be present in the console at a time.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands