manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 403 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 403

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-107

Document generated: 28.08.13

SW V4.9

 

  The Event List Filter provides the means to select desired controls within 

desired channels for display within the Event column. This set of Events is 

not limited to Mutes and Switches. Any combination of channels and controls 

is possible. Using the Object Picker for the Event List Filter, it is possible 

to select an exact set of controls for which Events will be displayed. For ex-

ample, to edit Mute locations, only the Events for Mutes on selected channels 

may be chosen for display. This will remove all other Events from view and 

provide an efficient means of performing Mute Event edits.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments