Studer Vista 5 M3 Page 190 Operating Instructions Manual Download

Page: 190 / 564

Vista 5 M3 Digital Mixing System

4-46 GC Operation

Document generated: 28.08.13

SW V4.9

Example 2

Goal

The value of channel 3 should be reduced by 4 dB on ‘snapshot #1’, ‘snapshot

#3’, and ‘snapshot #5’.

These snapshots currently contain the following fader values:

‘snapshot #1’: 0 dB; ‘snapshot #3’: –5 dB; ‘snapshot #5’: –10 dB.

Therefore, after the update they should contain the new, updated values:

‘snapshot #1’: –4 dB; ‘snapshot #3’: –9 dB; ‘snapshot #5’: –14 dB.

Procedure

Make sure the

Enable Trim mode

option in the ‘Option: snapshot Auto-

mation’ menu is set.

Recall any snapshot.

Hold

ISO

on channel strip 3. Touch the fader

twice

in order to put it into Trim

mode.

Lower the fader of channel 3 by 4 dB (the exact trim value will be displayed

on the Vistonics screen).

Select ‘snapshot #1’ with the touch pad.

Hold the

CTRL

key on the control bay, and select ‘snapshot #3’ and ‘snapshot

#5’.

Click on ‘Recall and Update’, and confirm that you want to overwrite these

snapshots.

The console will automatically recall and update the selected snapshots.

Since the console assumes that the controls being in Trim mode have been

placed into this mode for the purpose of this update, the operator will be asked

whether these controls should be taken out of Trim mode afterwards.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands