Studer Vista 5 M3 Page 187 Operating Instructions Manual Download

Page: 187 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-43

Document generated: 28.08.13

SW V4.9

Now You Can:

Recall a Snapshot

• Select a snapshot from the List, and

• click on the

Recall

button, or

• simply double-click on the snapshot you wish to recall.

Clicking on the Next button will recall the currently selected snapshot, move

down by one row in the snapshot list and recall the next snapshot. The snaps-

hot that was recalled last is marked with a small triangle. If the ‘snapshot

Confirm’ option in the Options menu (refer to

chapter 4.6.4.10

) is checked,

there will be a pop-up dialog requiring confirmation of snapshot Recall. This

capability is useful for live environments, where you may not wish to delete

or overwrite too easily what you are doing.

Note:

Once a snapshot or preset is applied, the existing parameter settings are

replaced by those contained within the snapshot or preset. If the previous

settings had not been saved, there is an

Undo

button available, in order to go

back to the last settings before recalling the snapshot or preset. This has to

be confirmed as well if the ‘snapshot Confirm’ option in the Options menu

is active, as mentioned above.

Snapshot Preview

If you are not completely sure whether the selected snapshot is the right one,

click on the

Preview

button. Its colour changes to pink, and the Vistonics

screens indicate the parameter values of the selected snapshot, next to the

current values, in pink as well - as shown below for some mono Aux levels:

(Re-) Name a Snapshot

• Select a snapshot from the List, and

• Click on the

Name

button.

This action will bring up a window that allows the user editing this snapshot’s

name. Since snapshots are listed in alphabetical order, by carefully naming

you can arrange them exactly as you wish.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands