Studer Vista 5 M3 Page 175 Operating Instructions Manual Download

Page: 175 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-31

Document generated: 28.08.13

SW V4.9

4.4.2.8

How to Activate the Device Label Functionality

In order to activate the automatic import of your device labels from the device

label file, two conditions must be met:

• There must be a preset file named ‘

__DeviceLabels.pre

’ matching the

currently loaded configuration and holding your device label names.

• The ‘User Device Labels’ option in the SysAdmin/Device Labels menu

must be activated.

This will automatically show the device labels in the General Patch window

when switching to the corresponding label mode.

4.4.2.9

Where are the Device Labels Saved?

As you know, these labels are normally not changed for a specific session, but

will stay constant in a studio installation. This is why they are saved in a preset

(

*.pre

) file, being valid for the currently loaded configuration, rather than

just a snapshot or title. If a different configuration is loaded, you will need to

import the ‘

__DeviceLabels.pre

’ file from the previous configuration.

4.4.2.10

How to Create or Overwrite a Device Label

If you create a device label file from scratch or overwrite an existing one with

a new one, you may proceed as follows:

• Enter the device labels into the USER LABEL field of the patch (input

ports and output ports).

Do this in the USER LABEL field

• Enter SysAdmin mode in the GC by clicking the padlock icon on the

toolbar, and enter the system password.

• Go to the SysAdmin/Device Labels menu and select ‘Save and Apply User

Labels as Device Labels’.

4.4.2.11

How to Edit an Existing Device Label

Since the device labels are saved in a regular preset file, you just log in as the

system administrator and recall the ‘

__DeviceLabels.pre

’ file. You will see

the device labels again in the patch (USER LABEL field). Now you may edit

them; then either click UPDATE, or go to the SysAdmin / Device Labels /

‘Save and Apply User Labels as Device Labels’ menu.

4.4.2.12

Background Information

If you are using the device label functionality (option SysAdmin/Device

Labels/Use Device Labels), you activate an automatic and repetitive import

of these labels from the ‘

__DeviceLabels.pre

’ file into your patch. If you

create any snapshots, the current device labels will be part of the snapshot.

However, if you recall older snapshots that have been saved at a time when

no device labels were active, that snapshot on the disk will not be changed at

all. The snapshot will be loaded onto your console, visualized as it was saved

in your General Patch screen; but an instant later the current device labels

of your console will be copied into your patch. If you now choose to update

your snapshot or make any new ones, these will contain exactly the labels

you see on your General Patch screen.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands