Studer Vista 5 M3 Page 82 Operating Instructions Manual Download

Page: 82 / 564

Vista 5 M3 Digital Mixing System

2-42 Desk Operation

2.11 Virtual Vista

‘Virtual Vista’ is a Windows application that can be used both as an online

and offline editor. An indicator visible on all fader and control bay screens

shows whether the editor is currently online (i.e., connected either to a desk/

core system or to a core only), or offline. The former option can be thought

of in particular as a fail-safe scenario in case there should be a serious prob-

lem with the desk.

It is strongly recommended that the computer on which Virtual Vista is

installed has a minimum screen resolution of 1440 × 900 pixels.

Operating Modes

There are three different operating modes:

Offline

The offline editor is intended for setting up, preparing or changing shows

without having access to the actual console. All parameters can be controlled.

However, when working offline, no access to the monitoring facilities is

available.

Online, With Desk

Primary

Secondary

Bridge Port 1

The online editor can be used as an alternate control possibility next to the

console while the console is powered on and running. The two devices then

run in parallel.

All changes made on one device are reflected on the other immediately. The

online editor can also run on a wireless Tablet PC, so that the operator can

walk away from the console and adjust parameters as he walks around. All

parameters can be controlled.

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands