Studer Vista 5 M3, Operating Instructions Manual

Page: 423 / 564

Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-127
Document generated: 28.08.13 SW V4.9
Click-and-Type • Highlight all or part of the entry field with a click (hours, minutes, seconds,
and frames may be selected individually or as a group);
• Type in the desired timecode value (colons are not necessary when typing);
• Press Enter.
Click-and-Scroll • Highlight all or part of the entry field with a click, and, while holding the
trackball button, scroll the value up or down; an upward trackball motion
will increase the timecode value, and a downward motion will decrease it;
• Stop at the desired value and press Enter.
+/– From Existing Time • Press the + or – key from the computer keyboard, and an additional Time -
code Entry Field will appear;
• Using one of the highlight methods above, enter a timecode value;
• Press Enter. The math to add (+) or subtract (–) the entered value to/from
the existing timecode will be applied. The result of the math will be entered
as the new timecode address.
Right-Click Menu Selection • Right-click any part of the entry field;
• A menu of timecode address selections from which to choose will appear;
• Use the click/drag method to select a timecode address included in the
menu.
The items contained within the Right-Click Timecode Menu are as follows:
Mix/Timecode Items • Mix Begin: This is the first timecode address within the selected mix (the
selected mix is the open mix that has been chosen with the tabs at the bot-
tom of the Object Picker or Mix Viewer); clicking the ‘In’ button while
holding the ISO (AUTO MODE) key performs the same function.
• Mix End: This is the last timecode address within the selected mix; clicking
the ‘Out’ button while holding the Shift key performs the same function.
•
Current Time:
This is the current console timecode address.