Studer Vista 5 M3 Operating Instructions Manual Download

Page: 194 / 564

Vista 5 M3 Digital Mixing System

4-50 GC Operation

Document generated: 28.08.13

SW V4.9

If no gang is present, the whole console settings will be saved in a full snaps-

hot. If the ‘New snapshots include:’ setting is set to ‘No Mask’, there will

always be made a full snapshot, regardless of a gang being present or not. It

is also possible to set the partial snapshot to ‘Active snapshot Filter’. This

will actually create a partial snapshot out of the settings currently

not

masked

out by a snapshot Filter.

Saving Snapshot Masks

When working with partial snapshots (option available in ‘Option: ‘snapshot

Automation’), it is possible to right-click on the

Edit

link to the right of the

snapshots. A context menu will allow not only copying and pasting of masks

between snapshots, but also saving and loading of masks to/from files. The

files will be saved in the

C:\d950System\Users

directory.

This function can be very helpful when multiple operators are working on

the console. During rehearsals, both operators may randomly save snapshots.

After the rehearsal they select ‘their’ snapshots and apply a prepared mask to

them. This will make these particular snapshots only influence the part of the

console which the operator was working on. Other applications may contain

any recall of more complex masks.

Editing Snapshot Masks

If a partial snapshot already has been made and the user finds that he forgot to

have some channels in that snapshot, there is a powerful method to correct the

mask contained in a partial snapshot. As it has been mentioned at the begin-

ning of this chapter, each snapshot file in general contains all settings of the

console. A partial snapshot just adds an invisible mask to the audio settings.

Therefore it is possible to enter an edit mode, showing the

mask of a partial

snapshot

and giving the possibility to edit it. Let’s say you had channels 1 to 5

in a gang and made a partial snapshot of them, it is easily possible afterwards

to tell the system that this snapshot should have also contained the channel 6

data. How to do this?

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands