manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 224 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 224

Vista 5 M3 Digital Mixing System

4-80  GC Operation

Document generated: 28.08.13

SW V4.9

 

  This button opens a list that displays all tweaked library event settings. It 

prompts the operator to decide whether he wants to save or discard these 

tweaks, either globally or setting by setting. 

  

 

 The 

End Show

 mechanism simply makes sure that no tweaked setting can 

be forgotten to be either discarded or kept. It may, of course, also be used 

during a show or a rehearsal in order to clean up the current changes.

 

  If there are any tweaked settings or modified mute events that have not been 

saved already, there will appear a dialog box upon closing the clipboard 

library window, asking the user whether he wants to save the unsaved data. 

So again, no setting can be forgotten even if there is pressure of time.

  

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments