Studer Vista 5 M3 Page 390 Operating Instructions Manual Download

Page: 390 / 564

Vista 5 M3 Digital Mixing System

5-94 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.14.1 Protection Sets

Protection Sets

Any combination of controls on any combination of channels may be orga-

nized into ‘Protection Sets.’ These may be created, saved, and recalled as

needed. Any number of Protection Sets may be created and stored. Protection

Sets are available to any Mix Pass within the Title.

5.14.1.1

Creating Protection Sets

To create a Protection set, execute the following procedure:

Click the ‘Mix Protection Enabled’ button to open the ‘Automation

Protection’ window. The first time it is opened no Protection Sets will be

available and the various fields will be blank.

Click the ‘Edit…’

button. The ‘Object Picker for Select Objects to be

Removed From Automation Scope’ will open. Using this picker, controls

may be selected for Protection. For example, Mutes on channels 1...12

may be selected as a Protection Set. Refer to

chapter 5.17.2.1

for informa-

tion regarding the operation of the Object Picker.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands