SCore Live
SCore Live 13
Document generated: 20.09.13
8
7
6
5
4
3
2
1
S1
OFF
STATUS
LEDs
During power-up of the core, the Host card
STATUS
LEDs are controlled by
the embedded controller. After the operating system has successfully started
and initialized, the application (e.g. OnAir 3000) is taking over the control
over the LED bar.
Power-Up
The
STATUS
LED bar behavior depends on the setting of two DIP Switches
on the Host card (switch 2: POST, switch 4: DISPLAY) . If both switches
are OFF (default) the LED bar displays 3 different states: Self-test, OS copy,
OS initializing / application starting. The Host card self-test is indicated by
a flashing bottom LED and takes approximately 10 seconds. As soon as the
OS starts loading it displays the progress by sequentially lighting the LED bar
from bottom to top (less than 5 seconds). When the complete OS is transferred
into the memory the top LED starts flashing, indicating that the application
is loaded and initialized.
performing self-test
self-test successfully
completed
OS copy
progress
OS copy finished,
application starting
The OS copy progress bar can be disabled by setting switch 4 (DISPLAY)
to ON. Then the bottom LED will not stop flashing until the application is
loading and initializing.
If the self-test should not complete successfully and the OS cannot be copied,
a more detailed information can be displayed on the
STATUS
LEDs. Switch
2 (POST) activates this mode by sending Power On Self-Test messages to the
LED bar. This mode overrides the functionality of switch 4 if both are set to
ON. If a POST message does not change after 20 seconds it can be used to
identify an internal problem.
Summary of Contents for Vista 5 M3
