Studer Vista 5 M3 Operating Instructions Manual Download

Page: 232 / 564

Vista 5 M3 Digital Mixing System

4-88 GC Operation

Document generated: 28.08.13

SW V4.9

4.4.6.1.7

FaderGlow

The FaderGlow color assignment is performed in the strip setup as well.

After a right-click on the desired channel, click on the ‘Faderglow’ item; a list

will drop down offering the eight available colors and ‘no color’, i.e. Fader-

Glow switched off. In order to give the channels within the same FaderGlow

color group a label, click on the ‘Edit Color Labels’ item. A menu with label

entry fields for every FaderGlow color will open up.

The FaderGlow

setup is saved as a part of the Strip Setup, allowing different

operators who might alternately mix a show having their own, personal color

setup.

Note

The red fader glow colour is already used by the graphic EQ function. If you

intend to use the graphic EQ, red should not be assigned to channels other-

wise.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands