Studer Vista 5 M3 Page 474 Operating Instructions Manual Download

Page: 474 / 564



Tip

It is legal to have more buses than corresponding channel types, as in the

example above. The reason for this is that the buses (unlike in analog con-

soles) are valid audio signals and can be used as such in the Studer Vista patch.

They are simply summation buses which will output the sum of all assigned

inputs.

The newly edited configuration now looks as follows:

• 8 mono input channels

• 2 stereo input channels with changed processing

• 2 + 2 mono groups, different proc 4 group buses

• 2 mono m 2 master buses

• 6 mono Auxes + 6 mono AUX buses

• 2 stereo Auxes + 2 stereo AUX buses

• 2 solo buses

• 1 stereo PFL bus

Check the Interfaces

We will assume that for this example, the interfacing does not need to be

changed. We will only have a look at what interfacing is available in the

configuration we just changed. For this purpose, select ‘Interface’ from the

‘View’ menu.

Vista 5 M3 Digital Mixing System

6-16 Session Configuration

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands