Studer Vista 5 M3 Operating Instructions Manual Download

Page: 11 / 564

Declarations of Conformity

Class A Equipment - FCC Notice

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide a reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio com munications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own expense.

Caution:

Any changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment. Also refer to relevant

information in this manual.

CE Declaration of Conformity

We,

Studer Professional Audio GmbH,

CH-8105 Regensdorf,

declare under our sole responsibility that the product

Studer Vista 5, Vista 5 SR, Vista 5 M2 and Vista 5 M3, Digital Mixing

Systems

(from serial no. 1000)

to which this declaration relates, according to following regulations of EU

directives and amendments

• Low Voltage (LVD):

73/23/EEC + 93/68/EEC

• Electro magnetic Compatibility (EMC):

89/336/EEC + 92/31/EEC + 93/68/EEC

are in conformity with the following standards or normative documents:

• Safety:

EN 60950-1:2001 (Class I equipment)

• Safety of laser products:

EN 60825-1:2004 + A11 + A2, EN60825-2:2000

• EMC:

EN 55103-1/-2:1996, electromagnetic environments E2 and E4.

Regensdorf, August 30, 2007

B. Hochstrasser, President M. Lienert, Manager R&D

Conformity

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands