Studer Vista 5 M3 Operating Instructions Manual Download Page 286

Page: 286 / 564

Vista 5 M3 Digital Mixing System

4-142 GC Operation

Document generated: 28.08.13

SW V4.9

Control Group Members

Control Group Members can be selected to and deselected from a Control

Group during the console operation. This is done in a special Control Group

Edit mode. Any console channel can be selected as a member in a Control

Group. The members can be ‘stolen’ from one Control Group to another.

When a channel is selected as a member in a Control Group, its channel strip

displays the Control Group in the seven-segment display next to the fader in

the same manner as described above.

Operating an audio parameter on the Control Group Master influences that

parameter on all members (if that parameter has been selected in the Control

Group Filter Dialog Box during Control Group Edit mode). It offsets the

member value by the move amount of the Master. Operating the parameter

on the member influences only that member’s parameter.

Control Group Setup

The Control Groups are edited in the Control Group Setup Mode. This mode

is activated through the

SETUP: GROUPS

key

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Studer Vista 5 M3, Operating Instructions Manual, Page: 286 / 564

Search results

Summary of Contents for Vista 5 M3

Reviews: