Studer Vista 5 M3 Page 311 Operating Instructions Manual Download

Page: 311 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-15

Document generated: 28.08.13

SW V4.9

5.3 The Details

AutoTouchPlus provides a powerful and comprehensive automation system

that is easy and efficient to use. All users will find the flexibility to work in

the way most appropriate for the task at hand without overly complicated

procedures. Users will also find the power to efficiently create and fine-tune

the optimal mix.

AutoTouchPlus allows any control defined within a VMC file to be automated.

This includes faders, encoders, switches, and bus assignments. Connections

made within the new and improved General Patch, audio oriented objects in

the Channel Patch, and select Graphical Controller (GC) menu items may

also be automated.

5.3.1

About this Chapter

Assumptions

This chapter is designed to explain the operation of the Studer AutoTouchPlus

dynamic automation system. It will prepare the reader for basic to advanced

operation of the system. It assumes the user will have basic familiarity and

operational proficiency with the Vista consoles. The full understanding of

many of the terms and concepts depends on this familiarity. Refer to the

Console Operation chapters

of this manual as necessary.

Redundant Information

In several chapters information is repeated. This is to accommodate those who

will use this document as a reference, only going to the chapter(s) in which

help is needed. Redundant chapters will become obvious to those who will

read this document as a text, and may be skipped as desired.

This chapter is designed to provide information for both new as well as long-

time Vista users. Basic information is sometimes presented and is not intended

to offend advanced users.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands