Studer Vista 5 M3 Page 189 Operating Instructions Manual Download

Page: 189 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-45

Document generated: 28.08.13

SW V4.9

4.4.4.2

Multiple Snapshots

Updating Multiple Snapshots

Very often, certain parameters should be overwritten in multiple snapshots.

It may be important that only certain parameters are overwritten and others

are left as they are in the individual snapshots. In order to achieve this, place

those parameters into ‘Isolate’ mode and recall a snapshot. If this action is

now followed by an Update command, the values are changed as requested.

By using Trim mode (see chapter

4.4.4.7

), it is even possible to apply relative

changes to individual parameters of snapshots. E.g. place the fader 1 into Trim

mode and lower it by 8 dB. Recall the next snapshot and click Update. This

will save the original value of the second snapshot, reduced by 8 dB, to the

hard disk. See example #2 below for details.

This can be done even faster: First select multiple snapshots and click Recall

and Update once.

Note

The

Update

button is changing its name whenever multiple snapshots are

selected.

Selecting Multiple Snapshots

Multiple snapshots can be selected simultaneously by using the keyboard



SHIFT

and

CTRL

keys. The selection of multiple snapshots is following

standard windows rules:



SHIFT

+ click selects all snapshots in between

the two,

CTRL

+ click allows selection of individual snapshots.

Example 1

Goal

The value of channel 3 should be overwritten and set to –20 dB on ‘snapshot

#1’, ‘snapshot #3’, and ‘snapshot #5’

Procedure

Place the fader to –20 dB.

Hold

ISO

on channel strip 3. Touch the fader in order to put it into isolate

mode.

Select ‘snapshot #1’ with the touch pad.

Hold the

CTRL

key on the control bay, and select ‘snapshot #3’ and ‘snapshot

#5’.

Click on ‘Recall and Update’, and confirm that you want to overwrite these

snapshots.

The console will automatically recall and update the selected snapshots.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands