Studer Vista 5 M3, Operating Instructions Manual, Page: 365 / 564

Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-69
Document generated: 28.08.13 SW V4.9
Write To: Button s The MIX PASS – Write To: buttons determine the point at which the tran-
sition from Record Data to Read Mix Data will take place. As noted above,
there are four different Write To: functions, one of which must be selected.
The selected function button will illuminate when that function is active. Only
one function can be active at a time.
The four Write To: functions behave as follows:
• Punch Out : The Last Recorded Value (punch out value) will be applied
until the Punch out point. At the punch out point, the Record Data will
transition to the Read Mix Data. Punch Out is the default Write To:
function.
• Next Change : The Last Recorded Value will be applied until the next
recorded change in the Read Mix Data. At that point, the Record Data will
transition to Read Mix Data.
• Level Match : The current value of the control (by definition the Last
Recorded Value) will be written until it matches the Read Mix Data. At
this point, the Record Data will seamlessly transition to the Read Mix Data
and a punch out will occur. If a punch out occurs without the level being
matched, the control will not actually punch out until the levels match.
Any moves that are made before the levels match will be recorded. Match-
ing level may be accomplished by either moving the control to match the
Read Mix value or positioning the control where the Read Mix values will
intercept the physical position.
• End : The Last Recorded Value will be applied until the user-specified End
Time. All previously recorded values between the Last Recorded Value
(typically Punch Out) and the End Time will be erased.