Studer Vista 5 M3 Page 171 Operating Instructions Manual Download

Page: 171 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-27

Document generated: 28.08.13

SW V4.9

4.4.2.5.1

Sorting Options

There is a number of options for sorting the display of the Sources and Targets

in the General Patch Lists. This sorting is independent of which label type is

being displayed due to the global label mode selection.

Sort by Fixed Label:

Independent of the User Label, the Sources and Targets will be sorted and

displayed in alphabetical order, depending on the fixed label of the Sources/

Targets.

Sort by User Label:

The Sources and Targets will be sorted and displayed in alphabetical order,

depending on the User Labels of the Sources/Targets.

To select the sorting method, check the ‘fixed label’ or ‘user label’ option

button as shown below:

If the ‘Use Subclasses’ checkbox is selected, then the ‘Digital Input’ Source

List and ‘Digital Output’ Target List will be sorted and grouped by the defined

subclasses. This selection has highest priority of sorting.



Tip

The most useful sorting method is to Sort by ‘fixed label’ and ‘Use Subclas-

ses’.

4.4.2.5.2

View the Different Label Types

It is typical that a user will work in a single mode of label type display within

the GC. There are times, however, when it is useful to temporarily display

another of the label types globally within the GC to help with patching. The

Label mode is changed by clicking on the ‘Label’ button in the system toolbar:

Clicking this button will toggle the label view globally throughout all parts

of the GC. The label display can be toggled between

FIXED

USER

and

Inh

/Dev

(Inherited/Device). For a detailed description of how to work best

with labels, see below.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands