Studer Vista 5 M3 Page 199 Operating Instructions Manual Download

Page: 199 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-55

Document generated: 28.08.13

SW V4.9

4.4.4.9

Default Settings

In the preset List, there is always one line labeled

defaultSettings

. This is a

preset that is automatically generated for every Session Configuration, but

no file will be found in the corresponding Session Configuration directory

(as would be the case for other presets).

When recalled, the

defaultSettings

will reset the console to the defaults – it

functions much like a Total Reset.

DefaultSettings

cannot

be edited, renamed, deleted or updated.

4.4.4.10

Files and Backup

Snapshots and presets are saved as Windows-compatible files.

Usually, snapshots are saved in the current title directory, with a

*.snp

file

extension.

Usually, presets are saved in the Session Configuration directory, with a

*.pre

file extension.

All snapshot and preset files can be copied or moved to and restored from

a backup medium using the Make/Restore Backup facility (refer to

chapter

4.6.1.3

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands