Studer Vista 5 M3 Page 319 Operating Instructions Manual Download

Page: 319 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-23

Document generated: 28.08.13

SW V4.9

5.4.2

Touch & Un-Touch Events

Another crucial but easy to understand concept is that of Touch and Un-touch.

Auto TouchPlus is a very tactile system and relies on physical actions for ef-

ficient operation. Faders and encoders are touch-sensitive and can be made

to respond in different ways depending on the mode and operation being

performed. Switches and automatable GC items are not sensitive to physical

touch, but their actuation can generate similar messages as faders and encod-

ers.

Touch Events

The physical touching of a fader or encoder produces a ‘Touch Event’. Ac-

tuating an automatable switch or GC item may also generate a Touch Event,

depending on the current mode.

Un-touch Events

The physical release of a fader or encoder produces an ‘Un-touch Event’.

Automatable switches and GC items may also generate an Un-touch Event,

depending on the current mode.

Events and Auto TouchPlus

In most cases, Events come in Touch and Un-touch pairs… that is, a Touch

followed by an Un-touch. An example would be touching a fader, moving

it for a short period of time, and then releasing it. When the fader was first

touched, a Touch Event will be sent and when released an Un-touch will be

sent. AutoTouchPlus will either use both Events, ignore both Events, or sup-

press one or the other. Details of how these events are used and the operations

this makes possible are discussed throughout this document.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands