Studer Vista 5 M3 Page 381 Operating Instructions Manual Download

Page: 381 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-85

Document generated: 28.08.13

SW V4.9

As with any control, changes to General Patch connections may be Audi-

tioned.

Record a General Patch Change

To automate a connection in the General Patch, use the following procedure:

Select the desired global Control Mode.

Write

will overwrite previous

changes, both location and connection type.

Select

TOUCH – Record

Select the desired

Write To:

and

Extend Back To:

functions.

Open the General Patch if it is not already open.

Select the connection point to be automated (single click at the desired

location).

Make/break the desired connection as follows:

• To make a simple mono-to-mono connection, press the

MAKE CON-

NECT

function key above the trackball. (Double-clicking the connec-

tion location will bring up the connection menu where a mono-to-

mono connection may be made.)

• To make a complex connection (mono-to-stereo, stereo-to-stereo,

stereo-to-mono), double-clicking the connection location will bring

up the connection menu where the desired connection may be made.

• To break any connection, press the

BREAK CONNECT

function key

above the trackball. (Double-clicking the connection location will

bring up the connection menu where a connection may be broken.)

Upon the selection of the desired connection type, AutoTouchPlus will

punch-in. Following the rules for Press and Hold, the new connection

state will persist until the

Write To:

conditions are met or a Global Punch-

out occurs.

When timecode is stopped, a new Mix Pass will be generated.

Note

Like any other object within AutoTouchPlus, all General Patch connection

points are Static objects until a change state is recorded in the system. There-

fore, General Patch connections may be updated in the same manner as any

other Static control.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands