Studer Vista 5 M3 Page 335 Operating Instructions Manual Download

Page: 335 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-39

Document generated: 28.08.13

SW V4.9

5.6.1.3

Dump

The

Dump

function prevents a new pass from being written if flaws are

detected while a new Mix Pass is being created. This is useful if a mistake is

made during a Record pass and the resultant pass would not be worth keeping.

The

Dump

button is located next to the

Undo

Redo

buttons in the ACU

window.

Dumping a Mix Pass

Dump

is engaged when timecode is stopped, the new mix pass will not

be written. To prevent a new Mix Pass from being written, click the

Dump

button

before

playback of timecode stops.

Note

Dump

may be engaged and disengaged at any time while timecode is being

played back. This allows the user to kill a pass and then change his or her

mind before the timecode is stopped. As long as timecode hasn’t stopped, Kill

pass may be toggled on an off at will. The Kill Pass state that exists when

timecode is stopped will dictate the fate of the Record Mix Pass

Dump

will always disengage at the end of a Mix Pass.

Conditions

Dump

functions only when Record passes are in progress.

<Option>

• With <Protect Static From Kill Pass> checked in the Misc Options page,

changes made to Static controls are retained when

Dump

is used; also

refer to

chapter 5.22.7

Note

The Mix Options window is opened by clicking the ‘Options…’ button in

the AutoTouchPlus window. Clicking the appropriate Tab will open the cor-

responding page.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands