Studer Vista 5 M3 Page 126 Operating Instructions Manual Download

Page: 126 / 564

Vista 5 M3 Digital Mixing System

3-38 Parameters

Document generated: 28.08.13

SW V4.9

INP DIR / BAL

Selection from two input functions: INP BAL

INP DIR.

INP DIR / INP BAL

Rotary

The INP DIR function is used to control the

direction

of a stereo input signal.

Turning the rotary encoder shifts the input direction in 1° steps from –30°

(left) to +30° (right).

The INP BAL function is used to control the

balance

of a stereo input signal.

Turning the rotary encoder to the left attenuates the right channel from 0 to

–

∞

dB while the left channel remains at full input level, and vice versa.

DIR WIDTH On/Off

Optional, only if the width function is configured.

Switches the DIR WIDTH function on/off.

DIR WIDTH

Rotary

Optional, only if the width function is configured.

The DIR WIDTH parameter is used to control the width of the stereo signal.

It is only functional if there is a difference between the left and right input

channels, or if IBAL or IDIR has been used to create an offset between the

channels. The ST DIR control directs the position of the stereo signal, while

the DIR WIDTH control determines the

width

stereo spread

either side of

that position. DIR WIDTH operates over a range from 0% (mono) to 200%

(‘super stereo’).

ST DIR

Rotary

Left/right (or odd/even) panning control for a stereo output signal in 1° steps

from –30° (fully left) to +30° (fully right).

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands