Studer Vista 5 M3, Operating Instructions Manual, Page: 555 / 564

SCore Live
SCore Live 21
Document generated: 20.09.13
3 The bridge card must be started in in ‘Safe Boot Mode’. To do so, first power
the core down. Set the first segment of DIL switch S2 on the bridge card to
ON. Insert the card into the core and connect port 1 with your computer. After
powering up the core, the card will start up with IP address
192.168.1.38
.
4 Connect with the bridge card using FTP by typing the above address in the
address line of your browser ( ftp://192.168.1.38/ ), followed by Enter .
Select Login As... from the File menu.
5
Enter user name =
root
, and password =
Obelix
, as shown below. Click on
Log On .
6
Copy (‘download’) the shell script file
setup_network.sh
from the
fs0p0/bin/
folder and save it on your computer. Open it with a text editor
(WordPad recommended). The file of a card fresh from the factory will look
similar to the example below, it shows the IP addresses of the Ethernet ports
1 (
en0
) and 2 (
en1
):