manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 389 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 389

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-93

Document generated: 28.08.13

SW V4.9

5.14  Mix Protection

 

  Mix Protection allows individual controls or sets of controls to be ‘Protected’ 

or locked out from changes. Mix Protection may also be applied to the General 

Patch.

 

  When Protected, a control is essentially in a ‘read only’ mode. The Read Mix 

data for the Active Pass will be heard for all Protected controls. All the READ 

LOCK conditions apply to Protected controls (just not on a global basis).

 

  Controls and the General Patch may also be isolated from the mix using Mix 

Protection techniques.

 ‘

Mix Protection Enabled’ Button 

The ‘Mix Protection Enabled’ button opens the ‘Automation Protection’ 

window. The yellow LED symbol to the left of the button illuminates when 

any controls are in a Protected State. The ‘Mix Protection Enabled’ button is 

located in the AutoTouchPlus window.

  

 

  The Automation Protection window can also be opened by selecting ‘Protec-

tion’ from the GC Automation menu.

 

<Option>

  •  With <Protect Static For Protected Controls> checked on the Misc Op

-

tions page (also refer to 

chapter 5.22.7

), the values of Static controls are 

replayed, but changes to those values are not allowed.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments