Studer Vista 5 M3 Page 74 Operating Instructions Manual Download

Page: 74 / 564

Vista 5 M3 Digital Mixing System

2-34 Desk Operation

By pressing the

key on the channel strips, one individual channel strip can

be switched between the upper and the lower half of the console. If a channel

strip is currently displaying the third channel of section 1, it will afterwards

display the third channel of section 4. This function may be helpful when

working e.g. with backup microphones. In this way it is easy to switch to a

different channel while leaving the other ones untouched.

Second Layer Disabled (Classic Operation):

Section 2

Section 1

Section 3

Scrolling

Section 4

Section 5

Section 6

Second Layer Enabled:

Section 2

Section 1

Switches

Section 3

Section 4

Section 5

Section 6

Scrolling

It is still possible to globally switch to the second layer by pressing the sec-

tion navigator keys

4…6

. This will activate the

↓ L2 ↓

keys on each strip of

the console surface, indicating that the operator is now looking at the lower

half of the console.

Both Layers at the Same Time:

If the second layer option is activated, Vista 5 M3 may display the label and real

time metering of both layers at the same time. In order to activate this label

view, press

LABEL TYPE

several times until the label display area on the Vis-

tonics

screen shows the labels of both layers. This label of the second layer

appears only if there is a channel assigned to that strip on both layers. Use

the Strip Setup dialog on the graphic controller screen to do this.

Next to the label there is a small icon showing the level of the alternate layer

(below, left). When switched to the second layer, the label lines are swapped,

and the top line is showing the first layer label and metering (below, right).

Note:

The second layer is only displayed if the first layer is not empty.

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands