Vista 5 M3 Digital Mixing System
5-58 AutoTouchPlus
Document generated: 28.08.13
SW V4.9
punch. This ‘TOUCH AUDITION’ mode allows the Punch-In value to be
determined by touching and moving the control to the desired position
and releasing it to return to hearing the Read mix. The control retains its
AUDITION value awaiting Punch-In while the Read mix is heard.
5.8.6
ISO (Auto Mode) Key Function
ISO (AUTO MODE)
Key
The channel strip
ISO (AUTO MODE)
key is also known as ‘modifier key.’
ISO (AUTO MODE)
Key Function
Holding the
ISO (AUTO MODE)
key down temporarily reverses the state of the
TOUCH – RECORD
key on a local basis. For example, if
TOUCH – Re-
cord
is activated in the ACU window, holding down the
ISO (AUTO MODE)
key will deactivate
TOUCH – Record
on that channel as long as the key
is held down. If however
TOUCH – Record
is not active, holding the
ISO
(AUTO MODE)
key will activate it for that channel.
Using the
ISO (AUTO MODE)
Key
The
ISO (AUTO MODE)
key may be used as follows:
• Global
TOUCH – Record
Active:
- Holding the
ISO (AUTO MODE)
key will deactivate
TOUCH – Record
for that channel. This will allow enabled controls to be auditioned on
a local basis without being punched-in.
- Touching an enabled control will punch it in, holding it will keep it
in RECORD. Pressing and holding the
ISO (AUTO MODE)
key before
the control is released will deactivate
TOUCH – Record
. When it is
released, the control will not punch-out and will stay in RECORD in
a Held state.
• Global
TOUCH – Record
Inactive:
- Holding the
ISO (AUTO MODE)
key will activate
TOUCH – Record
for that channel. This will allow enabled controls to be punched-in on
a local basis.
- Holding the
ISO (AUTO MODE)
key and releasing a control that is in
RECORD will punch that control out. In this case, the control may be
touched at any time, but the
ISO (AUTO MODE)
key must be pressed at
the time of release for a punch-out to occur.
Summary of Contents for Vista 5 M3
