Studer Vista 5 M3, Operating Instructions Manual

Page: 57 / 564

Vista 5 M3 Digital Mixing System
Desk Operation 2-17
The near-field speakers are also used as PFL speakers as well as for moni-
toring off-air conference between external participants. The priority to what
signal is audible is set as follows:
1. PFL (unless CR INJECT active)
2. Nearfield
3. Off-air conference.
The level may be set differently for each of these cases. EXT PFL level may
adjust the off-air conference monitor level as soon as this signal is monitored.

MUTE,

DIM,

dB SPL
For muting, dimming, and setting the level of the control room speakers.
DIM
level may be adjusted by pressing this button several seconds. The cor-
responding DIM level is displayed in the control room level display. Adjust
the DIM level with the control room level knob.
Note: The level calibration of the different speakers as well as trimming the indi-
vidual speakers is done using the graphic controller screen.
2.6.4 Studio Monitoring
Select (STUDIO) A/B...
...to access this Area
Vista 5 M3 gives direct access to the most important functions for two studios.
Control and view of the following functions are directly accessible, without
having to select the appropriate studio first:
A / B RED LIGHT , SIG 1
(Ready)
, SIG 2
(Call)
, TALK
These keys allow activation of the corresponding function; they may light
automatically if the function has been activated e.g. by one of the GPI (general
purpose inputs).
The right part of the studio monitoring panel is used to control the audio level
of the two studios. First select the studio (
A
or
B
), then adjust the level and
select from ‘Selected Source on Source Selectors’ ( SEL ), feed studio with
same source as control room (
FOLW CR
), or send PFL/SOLO signals to the
studio (
PFL/SOLO
). It is also possible to disengage the mute mechanism nor-
mally activated by the red-light logic. This is done by activating
RE-INJECT
.
Document generated: 28.08.13 SW V4.9