Studer Vista 5 M3 Operating Instructions Manual Download

Page: 440 / 564

Vista 5 M3 Digital Mixing System

5-144 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.21 Auto Touch Plus Window

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[15]
[17]

[18]

[14]
[16]

[1]

Mix Tree window. Can be hidden by clicking on the

Hide Tree

button. If

hidden, this button turns into

Show Tree

, and the

Display Mode

button

becomes inactive (refer to

chapter 5.5.1

for details).

[2]

Several Mix Passes are shown in the Mix Tree window. With the

Display

Mode

button the display mode of the mix passes can be changed, and it can

be decided if only the Mix Pass number, only the Mix Pass name, or both

shall be displayed (refer to

chapter 5.5.1.3

for details).

[3]

Mix Pass Stack

; holds up to eight Mix Passes for immediate use (e.g. direct

comparison of Mix Passes (refer to

chapter 5.6.1

for details).

[4]

Glide Time

; defines the length of the glide. To enter a value just click in the

box and type the desired glide time, or use the right-click menu allowing e.g.

to access the Cue list with timecode cue points (also refer to

chapter 5.10.3

[5]

Mix Protection

; allows individual controls or a group of controls to be

protected or locked-out from changes (also refer to

chapter 5.14

). If

Mix

Protection

is on, the yellow LED symbol is on.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands