manualshive.com logo in svg

Siemens SINAMICS G120D CU240D-2 DP, Manual

The Siemens SINAMICS G120D CU240D-2 DP manual is available for free download on our website. This comprehensive user guide provides detailed instructions and insights on operating the product efficiently. Download your copy now from manualshive.com to unlock the full potential of this powerful device.

Share
Download
background image

3 Function diagrams
3.1 Table of contents

SINAMICS G120D

594

 

List Manual (LH14), 01/2016, A5E33842313

3.8

Safety Integrated Basic Functions

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

661

2800 – Parameter manager  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

662

2802 – Monitoring functions and faults/alarms  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

663

2804 – Status words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

664

2810 – STO (Safe Torque Off)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

665

2813 – F-DI (Fail-safe Digital Input)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

666

3.9

Safety Integrated Extended Functions

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

667

2818 – Parameter manager  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

668

2819 – SS1 (Safe Stop 1), internal STOP A, B, F   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669

2820 – SLS (Safely Limited Speed)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

670

2823 – SSM (Safe Speed Monitor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

671

2824 – SDI (Safe Direction)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

672

2840 – Control and status word  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

673

2850 – Fail-safe digital inputs (F-DI 0 ... F-DI 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

674

2853 – Fail-safe digital output (F-DO 0)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

675

2855 – Extended Functions via F-DI (p9601.2 = 1 and p9601.3 = 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

676

2856 – Safe State selection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

677

2857 – F-DO assignment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

678

2858 – Extended Functions via PROFIsafe (9601.2 = 1 and 9601.3 = 1)  . . . . . . . . . . . . . . . . . . . . . . . . 

679

3.10 Safety Integrated PROFIsafe

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

680

2915 – Standard telegrams   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

681

2917 – Manufacturer-specific telegrams   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

682

3.11 Setpoint channel

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

683

3001 – Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

684

3010 – Fixed speed setpoints, binary selection (p1016 = 2)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

685

3011 – Fixed speed setpoints, direct selection (p1016  = 1)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

686

3020 – Motorized potentiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

687

3030 – Main/supplementary setpoint, setpoint scaling, jogging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

688

3040 – Direction limitation and direction reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

689

3050 – Skip frequency bands and speed limitations   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

690

3060 – Basic ramp-function generator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

691

3070 – Extended ramp-function generator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

692

3080 – Ramp-function generator selection, status word, tracking  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

693

Summary of Contents for SINAMICS G120D CU240D-2 DP





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SINAMICS G120D CU240D-2 DP

YASKAWA A1000 Series Product Replacement Manual preview
A1000 Series
Brand: YASKAWA Pages: 44
Yamaha ACU16-C Manual preview
ACU16-C
Brand: Yamaha Pages: 32
ABB ACS 600 MultiDrive Hardware Manual preview
ACS 600 MultiDrive
Brand: ABB Pages: 94
Power One AURORA PVI-3.0-OUTD-S-US Installation And Operator'S Manual preview
AURORA PVI-3.0-OUTD-S-US
Brand: Power One Pages: 108
Kramer VM-4HDx1 User Manual preview
VM-4HDx1
Brand: Kramer Pages: 12
SMA Sunny Island 3324 User Manual preview
Sunny Island 3324
Brand: SMA Pages: 80
ViewSonic NMP-600 - Network Media Player Connects Specifications preview
NMP-600 - Network Media Player Connects
Brand: ViewSonic Pages: 2
Delta Electronics Q48SR Datasheet preview
Q48SR
Brand: Delta Electronics Pages: 14
Xantrex SW Plus 2524 Owner'S Manual preview
SW Plus 2524
Brand: Xantrex Pages: 344
Elabs QVP401 Instruction Manual preview
QVP401
Brand: Elabs Pages: 10
iBasso Audio DX240 User Manual preview
DX240
Brand: iBasso Audio Pages: 64
Belden Grass Valley LUMO User Manual preview
Grass Valley LUMO
Brand: Belden Pages: 71
TR-Electronic CE-58 Assembly Instructions Manual preview
CE-58
Brand: TR-Electronic Pages: 37
Tektronix SPG 422 Service Manual preview
SPG 422
Brand: Tektronix Pages: 286
SIP Neo3 Manual To Installation, Programming & Operation preview
Neo3
Brand: SIP Pages: 8
Felicitysolar IVGM4648 User Manual preview
IVGM4648
Brand: Felicitysolar Pages: 17
American Audio VersaPort User Instructions preview
VersaPort
Brand: American Audio Pages: 4
Atlona AT-HDSDI500 User Manual preview
AT-HDSDI500
Brand: Atlona Pages: 12

Brands by name

Popular brands

Load more brands