manualshive.com logo in svg

Siemens SINAMICS G120D CU240D-2 DP, Manual

The Siemens SINAMICS G120D CU240D-2 DP manual is available for free download on our website. This comprehensive user guide provides detailed instructions and insights on operating the product efficiently. Download your copy now from manualshive.com to unlock the full potential of this powerful device.

Share
Download
background image

SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313 

593

3 Function diagrams

3.1 Table of contents

2466 – PROFIdrive - POS_ZSW1 positioning status word 1 interconnection   . . . . . . . . . . . . . . . . . . . . . 

631

2467 – PROFIdrive - POS_ZSW2 positioning status word 2 interconnection   . . . . . . . . . . . . . . . . . . . . . 

632

2468 – PROFIdrive - receive telegram, free interconnection via BICO (p0922 = 999) . . . . . . . . . . . . . . . 

633

2470 – PROFIdrive - send telegram, free interconnection via BICO (p0922 = 999)   . . . . . . . . . . . . . . . . 

634

2472 – PROFIdrive - status words, free interconnection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

635

2473 – EtherNet/IP - control word / status word interconnection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

636

2476 – PROFIdrive - SATZANW block selection interconnection   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

637

2477 – PROFIdrive - AKTSATZ status word interconnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

638

2480 – PROFIdrive - MDI_MOD - MDI mode interconnection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

639

3.6

Internal control/status words

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

640

2501 – Control word, sequence control (r0898)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

641

2503 – Status word, sequence control (r0899) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

642

2505 – Control word, setpoint channel (r1198)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

643

2510 – Status word 1 (r0052)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

644

2511 – Status word 2 (r0053)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

645

2512 – Control word 1 (r0054)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

646

2513 – Supplementary control word (r0055)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

647

2520 – Control word, speed controller (r1406)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

648

2522 – Status word, speed controller (r1407)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

649

2526 – Status word, closed-loop control (r0056)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

650

2530 – Status word, current control (r1408)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

651

2534 – Status word, monitoring functions 1 (r2197) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

652

2536 – Status word, monitoring functions 2 (r2198) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

653

2537 – Status word, monitoring functions 3 (r2199) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

654

2546 – Control word, faults/alarms (r2138)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

655

2548 – Status word, faults/alarms 1 and 2 (r2139 and r2135)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

656

2610 – Sequence control - Sequencer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

657

2634 – Sequence control - missing enable signals, line contactor control  . . . . . . . . . . . . . . . . . . . . . . . . 

658

3.7

Brake control

   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

659

2701 – Basic brake control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

660

Summary of Contents for SINAMICS G120D CU240D-2 DP





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SINAMICS G120D CU240D-2 DP

Samson 6000 Series Mounting And Operating Instructions preview
6000 Series
Brand: Samson Pages: 40
ZCS TL Series User Manual preview
TL Series
Brand: ZCS Pages: 74
Z3 Technology Z3-MVE-20 User Manual preview
Z3-MVE-20
Brand: Z3 Technology Pages: 18
Z3 Technology Z3-DM8107-RPS User Instructions preview
Z3-DM8107-RPS
Brand: Z3 Technology Pages: 23
Palmer PLS02 Quick Start Manual preview
PLS02
Brand: Palmer Pages: 2
NAIM UnitiLite Connection Manual preview
UnitiLite
Brand: NAIM Pages: 22
QNAP iSignager iS-1620 Quick Installation Manual preview
iSignager iS-1620
Brand: QNAP Pages: 9
Tvone 1T-AVPC-HDMI Instruction Manual preview
1T-AVPC-HDMI
Brand: Tvone Pages: 13
Pro-Ject Audio Systems Stream Box DSA Instruction Manual preview
Stream Box DSA
Brand: Pro-Ject Audio Systems Pages: 20
MyGica ATV520E User Manual preview
ATV520E
Brand: MyGica Pages: 28
Samlexpower SDC-23 Owner'S Manual preview
SDC-23
Brand: Samlexpower Pages: 3
HEIDENHAIN RON 785 Mounting Instructions preview
RON 785
Brand: HEIDENHAIN Pages: 16
Growcol GHyper 3000 User Manual preview
GHyper 3000
Brand: Growcol Pages: 52
Black Box LMC009A-R5 User Manual preview
LMC009A-R5
Brand: Black Box Pages: 12
TaKo Electronics EBi Direct Interpolation DAC User Manual preview
EBi Direct Interpolation DAC
Brand: TaKo Electronics Pages: 7
Channel Vision B-204 Instructions preview
B-204
Brand: Channel Vision Pages: 2
Extron electronics DDS 402 User Manual preview
DDS 402
Brand: Extron electronics Pages: 54
M-Audio MIDISPORT 1x1 User Manual preview
MIDISPORT 1x1
Brand: M-Audio Pages: 26

Brands by name

Popular brands

Load more brands