Sharp DX-C310 Operation Operation Manual Download Page 379

Page: 379 / 705

4-86

FACSIMILE

Contents

Select job build mode.

(1) Select the [Special Modes] key.

☞

SPECIAL MODES

(page 4-69)

(2) Set the [Job Build] checkbox to

(3) Select the [Basic Menu] key.

Press the [BLACK & WHITE START] key to scan the first set.

To cancel scanning...

Press the [STOP] key (

Insert the next set of originals and press the [BLACK & WHITE START] key.

Repeat this step until all originals have been scanned.

To cancel scanning...

Press the [STOP] key (

). All scanned data will be cleared.

Select the [Read-End] key.

• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the

transmission is reserved.

• The [Configure] key can be selected to change the exposure, resolution, scan size, and send size for each original

page scanned.

• If the memory becomes full during scanning, a message will appear and the transmission will be canceled.

• This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel Job Build....

Set the [Job Build] checkbox to

in the screen of step 3.

BACK

(3)

(2)

BACK

Summary of Contents for DX-C310 Operation


































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DX-C310 Operation

Reviews:

Sharp DX-C310 Operation, Operation Manual, Page: 379 / 705

Search results

Summary of Contents for DX-C310 Operation

Reviews: