Sharp DX-C310 Operation Operation Manual Download Page 130

Page: 130 / 705

2-30

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and
delete special original sizes.

Storing original sizes (editing/clearing)

Up to 12 special original sizes can be stored.
Select the [Original] key in the base screen of copy mode and then follow the steps below.

Keys in the display can be selected with the arrow keys and the [OK] key.

Select the [Custom Size] key.

Store the original size.

(1) Select the [Store/Delete] key.

(2) Select the [Not Set] key.

If you wish to edit or clear a previously stored key...

Select the key that you want to edit or clear. The following screen will appear.

• To edit the key, select the [Modify] key and go to the next step.

• To clear the key, select the [Delete] key. Make sure that the original size has been cleared and press the [BACK]

key.

BACK

(1)

(2)

Summary of Contents for DX-C310 Operation


































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DX-C310 Operation

Reviews:

Sharp DX-C310 Operation, Operation Manual, Page: 130 / 705

Search results

Summary of Contents for DX-C310 Operation

Reviews: