Sharp DX-C310 Operation, Operation Manual, Page: 344 / 705

4-51
FACSIMILE
Contents
Specifying the original scan size (by paper size)
If the size of the placed original is different from the displayed original size or you wish to change the original size, you
must specify the scan size. Place the original in the document feeder tray or on the document glass and follow the steps
below.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Select the [Scan Size] key.
The original size set in the system settings appears to the right of the [Scan Size] key.
☞
IMAGE SETTINGS (page 4-47)
2
Select the [Scan Size] key.
3
Specify the scan size.
Select the appropriate original size.
• If you are sending a long original, select the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum length that can be scanned is 19-5/8" (500 mm) (the maximum height is 8-1/2" (216 mm)).
• To set an AB scan size, select the [AB Inch] key to show AB sizes.
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
OK BACK
OK BACK