manualshive.com logo in svg

Sharp DX-C310 Operation, Operation Manual, Page: 539 / 705

Share
Download
Sharp DX-C310 Operation Operation Manual Download Page 539

5-117

SCANNER/INTERNET FAX

Contents

BASIC SCANNING PROCEDURE

You can install the scanner driver on your computer from the CD-ROM that accompanies the machine, and use a 
TWAIN* compliant application to scan an image using your computer.
Scanning from your computer is most useful for scanning a single original such as a photo, particularly when you want to 
adjust scan settings as you scan. By contrast, scanning at the machine is most useful for continuous scanning of 
multiple originals.
* An interface standard used for scanners and other image input devices. When the scanner driver is installed on your 

computer, you can use any TWAIN-compliant application to scan an image.

As an example, the procedure for scanning from the "Sharpdesk" application that accompanies the machine is 
explained below.

[At the machine]

Keys in the display can be selected with the arrow keys and the [OK] key.

SCANNING FROM A COMPUTER
(PC Scan Mode)

• Scanning in PC scan mode is only possible when the scanner driver has been installed from the "Software CD-ROM" 

using the integrated installer. For the procedures for installing the scanner driver and configuring settings, see the 
Software Setup Guide.

• This function cannot be used when it has been disabled using "Disable Scan Function" in the system settings (administrator).

• The procedures for selecting the scanner driver and starting scanning vary depending on the TWAIN-compliant 

application. For more information, see the manual for the application or Help.

• When a large image is scanned at high resolution, the amount of data will be very large and scanning will take a long time. 

Be sure to select appropriate scan settings for the original (text, photo, etc.).

1

Place the original.

Place the original face up in the document feeder tray, or face 
down on the document glass.
When the original is a different size than the size setting, set 
the original size.

☞

SPECIFYING THE ORIGINAL SCAN SIZE AND SEND 
SIZE

 (page 5-61)

2

Switch to PC Scan mode.

(1) Select the [Mode Switch] key.

(2) Select the [PC Scan] key.

When PC scan mode is selected, only the [Exit] key displayed in the display can be used on the machine; no other 
keys can be used.

Summary of Contents for DX-C310 Operation


































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments