Sharp DX-C310 Operation Operation Manual Download Page 333

Page: 333 / 705

4-40

FACSIMILE

Contents

• When the speaker is used, transmission takes place without scanning the original into memory.

• A destination that includes an F-code (sub-address and passcode) cannot be used.

• A one-touch key that has multiple destinations or has a non-fax destination cannot be used.

System Settings (Administrator): Speaker Settings

The default volume level of the speaker can be changed in the "Speaker Settings".

Summary of Contents for DX-C310 Operation


































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DX-C310 Operation

Reviews:

Sharp DX-C310 Operation, Operation Manual, Page: 333 / 705

Search results

Summary of Contents for DX-C310 Operation

Reviews: