Sharp DX-C310 Operation, Operation Manual, Page: 127 / 705

2-27
COPIER
Contents
ENLARGING/REDUCING THE LENGTH AND WIDTH
SEPARATELY (XY Zoom)
The XY Zoom feature allows the horizontal and vertical copy ratios to be changed separately.
Both the horizontal and vertical ratios can be set from 50% to 200% in increments of 1%.
Select the [Copy Ratio] key in the base screen of copy mode and then follow the steps below.
When 50% is selected for the horizontal ratio and 70% is selected for the vertical ratio
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Select the [XY Zoom] key.
2
Set the horizontal and vertical ratios.
(1) Set the X (horizontal) ratio.
Select the number display of the X (horizontal) ratio and
press the [OK] key. A number entry screen will appear.
Enter the desired number with the numeric keys and
select the [OK] key in the number entry screen.
A ratio from 50% to 200% can be selected in increments of 1%.
(2) Set the Y (vertical) ratio.
Set the Y (vertical) ratio in the same way as the X
(horizontal) ratio.
(3) Select the [Basic Menu] key.
You will return to the base screen.
Make sure that a paper size suitable for the ratio is selected.
You can also change the number with the keys. Select the key of the direction you wish to
change and press the [OK] key.
To increase the ratio, select the
key and press the [OK] key. To decrease the ratio, select the key and
press the [OK] key. (To make the ratio change continuously, hold down the [OK] key after selecting the
key. If you continue to hold down the [OK] key for more than 3 seconds, the ratio will start changing quickly.)
When the automatic document feeder is used, the vertical and horizontal ratio selection ranges are both 50% to 200%.
To return the ratio to 100%...
To return the ratio setting to 100%, select the [Copy Ratio] key to display the ratio menu and then select the [100%] key.
Original Copy
OK BACK
OK BACK
(1), (2)
(3)