2. CPU
Rev.3.00 Jul. 19, 2007 page 62 of 532
REJ09B0397-0300
2.9 Application
Notes
2.9.1
Notes on Data Access
Access to Empty Areas:
The address space of the H8/300L CPU includes empty areas in addition
to the RAM, registers, and ROM areas available to the user. If these empty areas are mistakenly
accessed by an application program, the following results will occur.
•
Data transfer from CPU to empty area
The transferred data will be lost. This action may also cause the CPU to misoperate.
•
Data transfer from empty area to CPU
Unpredictable data is transferred.
Access to Internal I/O Registers:
Internal data transfer to or from on-chip modules other than the
ROM and RAM areas makes use of an 8-bit data width. If word access is attempted to these areas,
the following results will occur.
•
Word access from CPU to I/O register area
Upper byte: Will be written to I/O register.
Lower byte: Transferred data will be lost.
•
Word access from I/O register to CPU
Upper byte: Will be written to upper part of CPU register.
Lower byte: Unpredictable data will be written to lower part of CPU register.
Byte size instructions should therefore be used when transferring data to or from I/O registers
other than the on-chip ROM and RAM areas. Figure 2.17 shows the data size and number of states
in which on-chip peripheral modules can be accessed.
Summary of Contents for F-ZTAT H8 Series
