Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 3862 / 3946

[edit protocols oam ethernet connectivity-fault-management
maintenance-domain private]
user@switch1#
set maintenance-association private-ma
4.
Enable the continuity check protocol and specify the continuity check hold interval:
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain private maintenance-association private-ma]
user@switch1#
set continuity-check hold-interval 1s
5.
Configure the maintenance association end point (MEP):
[edit protocols oam ethernet connectivity-fault-management
maintenance-domain
private maintenance-association private-ma]
user@switch1# set mep 100 interface ge-1/0/1 auto-discovery direction down
Results Check the results of the configuration.
[edit]
user@switch1#
show
protocols {
oam {
ethernet {
connectivity-fault-management {
maintenance-domain private {
level 0;
maintenance-association private-ma {
continuity-check {
interval 1s;
}
mep 100 {
interface ge-1/0/1;
auto-discovery;
direction down;
}
}
}
}
}
Configuring Ethernet OAM Connectivity Fault Management on Switch 2
CLI Quick
Configuration
To quickly configure Ethernet OAM CFM, copy the following commands and paste them
into the switch terminal window:
[edit protocols oam ethernet connectivity-fault-management maintenance-domain ]
set name-format character-string
set maintenance-domain private level 0
set maintenance-association private-ma
set continuity-check hold-interval 1s
Step-by-Step
Procedure
The configuration on switch 2 mirrors that on switch 2.
1.
Specify the maintenance domain name format:
[edit protocols oam ethernet connectivity-fault-management]
user@switch2#
set name-format character-string
2.
Specify the maintenance domain name and the maintenance domain level:
Copyright © 2010, Juniper Networks, Inc. 3766
Complete Software Guide for Junos
®
OS for EX Series Ethernet Switches, Release 10.3