Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 1489 / 3946

•
To enable L2PT for all supported protocols:
[edit]
user@switch#
set vlans customer-1 dot1q-tunneling layer2-protocol-tunneling all
3.
(Optional) Configure the drop threshold:
NOTE: If you also configure the shutdown threshold, ensure that you
configure the drop threshold value to be less than or equal to the shutdown
threshold value. If the drop threshold value is greater than the shutdown
threshold value and you to try to commit the configuration changes, the
commit will fail.
[edit]
user@switch#
set vlans customer-1 dot1q-tunneling layer2–protocol-tunneling stp
drop-threshold 50
4.
(Optional) Configure the shutdown threshold:
NOTE: If you also configure the drop threshold, ensure that you configure
the shutdown threshold value to be greater than or equal to the drop
threshold value. If the shutdown threshold value is less than the drop
threshold value and you to try to commit the configuration changes, the
commit will fail.
[edit]
user@switch#
set vlans customer-1 dot1q-tunneling layer2–protocol-tunneling stp
shutdown-threshold 100
NOTE: Once an interface is disabled, you must explicitly reenable it using
the clear ethernet-switching layer2-protocol-tunneling error command.
Otherwise, the interface remains disabled.
Related
Documentation
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1368
•
•
Understanding Layer 2 Protocol Tunneling on EX Series Switches on page 1299
Configuring MAC Notification (CLI Procedure)
When a switch learns or unlearns a MAC address, SNMP notifications can be sent to the
network management system at regular intervals to record the addition or removal of
the MAC address. This process is known as MAC notification.
1393 Copyright © 2010, Juniper Networks, Inc.
Chapter 59: Configuring Bridging and VLANs