Juniper JUNOS OS 10.3 - SOFTWARE, Manual

Page: 2587 / 3946

show pim bootstrap
Syntax show pim bootstrap
<instance instance-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switch)
show pim bootstrap
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
instance option introduced in Junos OS Release 10.0 for EX Series switches.
Description For sparse mode only, display information about Protocol Independent Multicast (PIM)
bootstrap routers.
Options none —Display PIM bootstrap router information for all routing instances.
instance instance-name —(Optional) Display information about bootstrap routers for a
specific PIM-enabled routing instance.
logical-system (all | logical-system-name )
—(Optional) Perform this operation on all logical
systems or on a particular logical system.
Required Privilege
Level
view
List of Sample Output show pim bootstrap on page 2492
show pim bootstrap instance on page 2492
Output Fields Table 325 on page 2491 describes the output fields for the
show pim bootstrap
command.
Output fields are listed in the approximate order in which they appear.
Table 325: show pim bootstrap Output Fields
Field Description Field Name
Name of the routing instance.
Instance
Bootstrap router. BSR
Priority of the routing device to be elected to be the bootstrap router.
Pri
Local routing device’s address.
Local address
Local routing device’s address priority to be elected as the bootstrap
router. Pri
Local routing device’s election state:
Candidate
,
Elected
, or
Ineligible
.
State
How long until the local routing device declares the bootstrap router
to be unreachable, in seconds.
Timeout
2491 Copyright © 2010, Juniper Networks, Inc.
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast